Freelander Service Procedures
TORQUE WRENCH SETTINGS
06-7
†
Tighten in sequence
*
New bolts must be fitted
+ Apply sealant, Part No. STC50552 to threads
++ Apply sealant, Part No. STC 4600 to threads
+++ Apply sealant, Part No. STC 50550 to threads
Ignition coils to LH inlet manifold nut and bolts
9 Nm
7 lbf.ft
Ignition plug top coils to spark plug bolts
9 Nm
7 lbf.ft
Inlet manifold to cylinder head nuts and bolts
25 Nm
18 lbf.ft
IRD support bracket to front mounting plate bolts
45 Nm
33 lbf.ft
IRD support bracket to sump bolts
45 Nm
33 lbf.ft
LH mounting to body bolts
48 Nm
35 lbf.ft
LH mounting bracket to gearbox bolts
85 Nm
63 lbf.ft
LH mounting to gearbox bracket through bolt
100 Nm
74 lbf.ft
Oil cooler to sump mounting bracket nuts
25 Nm
18 lbf.ft
Oil cooler pipes to oil filter and oil cooler unions
26 Nm
19 lbf.ft
Oil dipstick tube bracket to cylinder block bolt
9 Nm
7 lbf.ft
Oil pick-up strainer to bearing ladder bolts
+
8 Nm
6 lbf.ft
Oil pressure relief valve plug nut
+
25 Nm
18 lbf.ft
Oil pressure switch
14 Nm
10 lbf.ft
Oil pump to cylinder block bolts
†
⇒
Stage 1
⇒
Stage 2
5 Nm
9 Nm
4 lbf.ft
7 lbf.ft
PAS pipe to engine front mounting plate bolt
25 Nm
18 lbf.ft
PAS pipe support bracket to RH hydramount nut
85 Nm
63 lbf.ft
Sump to lower crankcase bolts
†++
35 Nm
26 lbf.ft
Timing belt cover (front LH and RH) bolts
4 Nm
3 lbf.ft
Timing belt cover (lower) to cylinder block bolts
9 Nm
7 lbf.ft
Timing belt cover (rear LH and RH) bolts
4 Nm
3 lbf.ft
Rear timing belt cover backplate bolts
9 Nm
7.5 lbf.ft
Top arm to RH hydramount nut
85 Nm
63 lbf.ft
Top arm bracket to engine front plate and RH mounting bolts
100 Nm
74 lbf.ft