L322 Range Rover Service Procedures
ENGINE - V8
12-2-116 OVERHAUL
3. Disconnect SAI vacuum hose from inlet
manifold end cover, note fitted position and
remove reservoir and vacuum switch from inlet
manifold.
CAUTION: Always fit plugs to open
connections to prevent contamination.
4. Remove 2 bolts securing engine breather
separator to bracket on inlet manifold and move
the separator aside.
5. Loosen clip and disconnect engine breather
hose from inlet manifold end cover.
CAUTION: Always fit plugs to open
connections to prevent contamination.
6. Loosen clip and disconnect engine breather
hose from LH camshaft cover.
CAUTION: Always fit plugs to open
connections to prevent contamination.
7. Disconnect purge control valve hose from inlet
manifold.
CAUTION: Always fit plugs to open
connections to prevent contamination.
8. Remove 10 nuts securing induction manifold to
cylinder heads and remove 10 spacers.
9. Raise inlet manifold for access to manifold
drain hose.
M30 1165
M30 1166