Gasket Replacement for Range Rover V8 Induction Manifold
ENGINE - V8
OVERHAUL 12-2-115
Reassembly
1. Lubricate new 'O' rings with rubber grease and
fit to grooves in coolant pump and coolant
manifold.
2. Fit coolant pipes to the coolant pump.
3. Position new gaskets and coolant manifold to
cylinder heads, fit bolts and tighten to 10 Nm (7
lbf.ft).
Refit
1. Fit induction manifold.
Engine - V8, OVERHAUL, Gasket(s)
Gasket(s) - induction manifold
$% 30.15.08.01
Disassembly
1. Remove nut securing positive terminal to
bracket on inlet manifold and release terminal
from bracket.
2. Disconnect vacuum hose from secondary air
injection (SAI) control valve.
CAUTION: Always fit plugs to open
connections to prevent contamination.
M30 1164