L322 Range Rover Service Procedures
ALARM SYSTEM AND HORN
REPAIRS
86-5-1
ALARM SYSTEM AND HORN
REPAIRS
Solenoid - motor - tailgate
$% 86.26.02
Remove
1. Remove tailgate lower trim casing.
2. Remove tailgate latch assembly.
DOORS, REPAIRS, Latch - outer -
3. Disconnect multiplug from solenoid motor.
4. Release cover from tailgate support cable,
remove Torx bolt, move cable aside and collect
solenoid motor.
Refit
1. Position solenoid motor to tailgate, ensure latch
drive spindle is central to hole. Fit bolt to cable,
secure motor and tighten to 25 Nm (18 lbf.ft).
2. Connect multiplug.
3. Fit tailgate latch assembly.
DOORS, REPAIRS, Latch - outer -
4. Fit lower trim casing to tailgate.
Switch - tailgate release - lower
$% 86.26.26
Remove
1. Remove lower tailgate finisher.
DOORS, REPAIRS, Finisher - upper
2. Disconnect multiplug from tailgate release
switch.
3. Release clips and remove switch from tailgate.
Refit
1. Fit switch and connect multiplug.
2. Fit tailgate finisher.