L322 Range Rover Service Procedures
ALARM SYSTEM AND HORN
REPAIRS
86-5-3
Sensor - alarm - tilt
$% 86.77.06
Remove
1. Make the SRS system safe.
Supplementary Restraint System (SRS)
Precautions.
2. Remove front passenger seat.
3. Release 2 turnbuckles securing cover and
remove cover.
4. Release harness junction box and lay aside.
5. Remove 2 nuts securing holder.
6. Release tilt sensor from holder, disconnect
multiplug and remove sensor.
Refit
1. Position sensor, connect multiplug and secure
to holder.
2. Fit holder to studs and tighten nuts to 3 Nm (2.2
lbf.ft).
3. Fit junction box to holder.
4. Fit cover and secure with turnbuckles.
5. Fit front seat.
6. Initiate using TestBook/T4.
M86 5717