L322 Range Rover Service Procedures
EXTERIOR FITTINGS
REPAIRS
76-2-1
EXTERIOR FITTINGS
REPAIRS
Panel - extension - front wing
$% 76.10.03
Remove
1. Remove 9 screws securing rear of wheelarch
liner to inner wing and sill, release liner from
wing for access.
2. Remove scrivet securing front wing extension
panel to lower wing.
3. Release and remove the lower front wing
extension from retaining clips.
4. Release and remove the sill seal from the front
wing extension panel.
NOTE: Do not carry out further dismantling if
component is removed for access only.
5. Remove 2 securing clips from the front wing
extension.
Refit
1. Fit clips to front wing extension.
2. Fit and secure sill seal to front wing extension.
3. Fit front wing extension and secure with clips.
4. Fit and secure scrivet to front wing extension.
5. Fit and secure wheelarch liner.