L322 Range Rover Service Procedures
EXTERIOR FITTINGS
REPAIRS
76-2-9
6. Remove 2 screws securing LH inner edge of
wheel arch liner to undertray, repeat on RH
side.
7. Remove 6 remaining screws securing
undertray, release panel and remove.
NOTE: Do not carry out further dismantling if
component is removed for access only.
8. Remove 6 screw retaining clips from undertray.
Refit
1. Fit screw retaining clips to undertray.
2. Position undertray and secure with screws.
3. Fit screws securing air dam and wheelarch
liners.
4. Fit and secure towing eye finisher.
Bumper armature - rear
$% 76.22.52
Remove
1. Open both tailgates, release and fold back
parcel shelf.
2. Remove rear bumper.
3. Raise spare wheel cover and support on stand.
4. Release and remove both LH and RH access
panels.
5. Remove Allen bolts securing LH and RH
luggage securing rings, remove rings.
6. Remove 2 turn buckles securing rear quarter
trim on LH and RH side of vehicle, remove trim.
7. Locate straps and remove both LH and RH
loadspace bin covers.
M76 4277
M76 4316