L322 Range Rover Service Procedures
EXTERIOR FITTINGS
76-2-2
REPAIRS
Wing - front
$% 76.10.24
Remove
1. Secure bonnet in service position.
2. Remove front wing grille.
3. Remove front indicator lamp assembly.
4. Mark fitted position of front wing relative to
body.
5. Remove 8 bolts securing front wing panel to
inner wing and 'A' post.
6. Collect 2 nylon spacers from the front vertical
mountings.
7. Remove side repeater lamp from front wing.
assembly - indicator side repeater.
8. Remove and discard 5 Torx bolts securing front
wing panel to inner wing mounting brackets.
9. Remove front wing panel.
Refit
1. Clean front wing body mounting brackets.
2. Position front wing to body, fit and finger tighten
new Torx bolts.
3. Position front wing nylon spacers to vertical
mounting bracket, fit and finger tighten bolts.
4. Fit and lightly tighten remaining bolts.
5. Align front wing to marks and tighten all bolts to
10 Nm (7 lbf.ft).
6. Fit front wing grille.
7. Fit front indicator lamp assembly.