L322 Range Rover Service Procedures
EXTERIOR FITTINGS
REPAIRS
76-2-3
8. Fit side repeater lamp to front wing.
assembly - indicator side repeater.
9. Secure bonnet struts.
Liner - front wheel arch
$% 76.10.48
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Remove 3 plastic nuts securing inner wheel
arch liner.
4. Remove 11 hexagonal headed screws
securing wheel arch liner.
5. Remove 2 screws securing front and rear edge
of wheel arch liner to sill and bumper extension.
6. Release and remove wheel arch liner.
Refit
1. Fit wheel arch liner.
2. Fit and secure plastic nuts to studs.
3. Fit and tighten screws securing wheel arch liner
to wing and bumper.
4. Fit road wheel and tighten nuts to 140 Nm (103
lbf.ft).
5. Remove stand and lower vehicle.