L322 Range Rover Service Procedures
MAINTENANCE
10-6
PROCEDURES
Handbrake
Check
1. With the vehicle stationary, on a level surface,
apply and release handbrake and check for
correct operation.
BRAKES, REPAIRS, Pads - front.
Road wheels
Remove and refit
1. Mark the wheel to stud relationship to ensure
that the wheels are refitted in the same
position.
2. Loosen wheel nuts. Raise the vehicle to a
wheel-free condition, remove the wheel nuts
and remove the wheels.
3. Clean wheel hub centre and spigot.
4. Apply a thin coat of anti-seize compound to
wheel hub centre.
5. Refit wheels to original position.
6. Fit and lightly tighten wheel nuts.
7. Lower vehicle and tighten wheel nuts to 140
Nm (103 lbf.ft)
CAUTION: When tightening wheel nuts, do
not use power tools. Tighten nuts by
diagonal selection using suitable torque
wrench.
M01 0255