landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Ancillary drive belt > < Cooling system
Page 133
background image

MAINTENANCE

10-10

PROCEDURES

Spark plugs - V8 engine

Replace

Take great care when fitting spark plugs not 
to cross-thread plug, otherwise costly 
damage to cylinder heads will result. It is 
essential that only the correct grade of 
spark plugs, approved for this engine are 
fitted. Incorrect grade of spark plugs may 
lead to piston overheating and engine 
failure. 

1. Disconnect battery earth lead.
2. Remove ignition coils.

 

 + 

 ENGINE MANAGEMENT SYSTEM - 

V8, REPAIRS, Ignition coils - multiple - set.

3. Remove 8 spark plugs.

CAUTION: Do not attempt to clean or adjust 
spark plug gaps.  If a spark plug problem 
exists, try substituting the defective spark 
plug with a new one.

4. Fit spark plugs and tighten to 31 Nm (23 lbf.ft).
5. Fit ignition coils.

 

 + 

 ENGINE MANAGEMENT SYSTEM - 

V8, REPAIRS, Ignition coils - multiple - set.

6. Connect battery earth lead.

Air cleaner element - Td6 engine

Replace 

1. Replace air cleaner element. 

 

 + 

 ENGINE MANAGEMENT SYSTEM - 

Td6, REPAIRS, Element - air cleaner.

Air cleaner element - V8 engine

Replace

1. Replace air cleaner element.

 

 + 

 ENGINE MANAGEMENT SYSTEM - 

V8, REPAIRS, Element - air cleaner.

Ancillary drive belt > < Cooling system