L322 Range Rover Service Procedures
EXTERIOR FITTINGS
REPAIRS 76-2-19
Refit
1. Fit adhesive clips to finisher, note fitted
position.
2. Fit retaining clips to finisher.
3. Clean tailgate, remove remaining adhesive
residue.
4. Remove protective covering from adhesive
pads, align finisher to tailgate and secure clips.
Ensure adhesive pads are pressed into
position.
Front grille
$% 76.55.03
Remove
1. Remove 3 screws securing grille to bonnet
locking platform.
2. Release 3 clips securing grille to armature.
3. Disconnect multiplug from ambient air
temperature (AAT) sensor.
4. Remove grille.
NOTE: Do not carry out further dismantling if
component is removed for access only.
5. Release and remove AAT sensor from grille.
Refit
1. Fit AAT sensor to grille.
2. Connect multiplug.
3. Fit grille and secure with screws.