L322 Range Rover Service Procedures
ENGINE - V8
OVERHAUL 12-2-101
Strainer - oil pick up
$% 12.60.20.01
Remove
1. Remove lower sump gasket.
Engine - V8, OVERHAUL, Gasket -
Disassembly
1. Remove 2 bolts securing oil pick-up strainer to
oil pump, remove strainer and discard 'O' ring.
Inspect
1. Clean oil pick up strainer and mating faces.
Reassembly
1. Fit new 'O' ring to oil pump groove location,
position oil pick-up strainer to oil pump.
2. Fit 2 bolts securing oil pick-up strainer to oil
pump and tighten bolts to 10 Nm (7 lbf.ft).
Refit
1. Fit lower sump gasket.
Engine - V8, OVERHAUL, Gasket -
Pump - engine oil
$% 12.60.26.02
Remove
1. Remove sump gasket.
Engine - V8, OVERHAUL, Gasket -
Disassembly
1. Remove bolt securing oil pump.
2. Rotate oil pump drive chain tensioning nut anti-
clockwise to release the tension.
3. Remove nut securing gear to oil pump and
remove the gear.