L322 Range Rover Service Procedures
SCREENS
REPAIRS
76-4-7
8. Apply a continuous bead of sealant to quarter
light as shown.
9. Fit and align quarter light to body. Lightly press
on glass to seat sealer.
10. Connect receiver multiplug.
11. Fit rear quarter trim access panel
12. Remove protective covers and tape.
13. Test sealer for leaks, apply additional sealer if
necessary. If water is used, allow sealer to dry
before testing. Spray water around glass and
check for leaks. Mark any area that leaks. Dry
glass and sealer then apply additional sealer.
14. Fit quarter light front finisher.
15. Fit 'E' post finisher.