L322 Range Rover Service Procedures
STEERING
REPAIRS
57-21
17. Disconnect height sensor multiplugs.
18. Disconnect multiplug from PAS rack pinion
sensor.
19. Position container to collect PAS fluid spillage.
20. Loosen union nut, disconnect PAS outlet hose
from pump and discard 'O' ring.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
21. Remove nut securing PAS hose to mounting.
22. Release and disconnect PAS return hose from
fluid cooler.
23. If fitted: Remove 2 speed nuts securing each
anti-roll bar heatshield to body and 2 bolts
securing each heatshield to sub-frame.
Remove heatshields.
24. Use a transmission jack to support the sub
frame.
M54 0186
M57 1115
M57 1173