landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Power steering rack - left hand drive - Td6|Page 526 > < Power steering pressure test - V8|Page 523
Page 434
background image

STEERING

REPAIRS

57-7

REPAIRS

Power steering rack - left hand drive - 
Td6 

$% 57.10.01 

Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 

 + 

 GENERAL INFORMATION, Electrical 

Precautions.

Remove

1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Raise front of vehicle and support under body.
4. Remove front road wheels.
5. Remove undertray.

 

 + 

 EXTERIOR FITTINGS, REPAIRS, 

Undertray - front.

6. Remove 4 bolts securing the air flow panel and 

remove panel.

7. Remove LH drive shaft.

 

 + 

 DRIVESHAFTS, REPAIRS, Drive 

shaft - front - LH.

8. Remove and discard nut securing RH track rod 

ball joint to steering arm.

9. Fit an M14 nut to ball pin, flush with end of pin.

10. Using LRT-57-036 separate ball pin from 

steering arm. Remove M14 nut and release ball 
pin from steering arm.

CAUTION: Ensure ball joint seal is not 
damaged. A damaged seal will lead to 
premature failure of the joint.

11. Remove 2 nuts securing links to anti-roll bar 

and disconnect links.

M54 0179

LRT-57-036

M60 0778

Power steering rack - left hand drive - Td6|Page 526 > < Power steering pressure test - V8|Page 523