L322 Range Rover Service Procedures
STEERING
57-34
REPAIRS
2. Fit track rod end to track rod the number of
turns noted on removal.
3. Clean track rod end taper and taper seat.
4. Connect track rod end to steering arm, fit new
nut and tighten to 80 Nm (59 lbf.ft).
5. Fit road wheel and tighten nuts to 140 Nm (103
lbf.ft).
6. Remove stands and lower vehicle.
7. Check and adjust front wheel alignment.
wheel alignment - check & adjust.
Steering wheel
$% 57.61.01
Remove
1. Remove airbag module from steering wheel.
Airbag module - steering wheel.
2. Models with heated steering wheel:
Disconnect multiplug from rotary coupler.
CAUTION: Centralise the steering wheel
with the road wheels in the straight ahead
position. This will ensure that the rotary
coupler is locked as the steering wheel is
removed.
3. Restrain steering wheel and remove retaining
bolt.
RHD vehicles
M57 1202
