LR3/Disco 3
Installation
1 .
CAUTION: Make sure the stabilizer bar is correctly installed.
Install the stabilizer bar.
2 .
Install the stabilizer bar bushing.
3 .
Install the stabilizer bar clamps.
Tighten the 4 retaining bolts to 62 Nm (46 lb.ft).
4 .
Install the body mounts.
5 .
Lower the body.
Remove the stands.
6 .
Install the body mount retaining bolts.
Tighten the 8 retaining bolts to 133 Nm (83 lb.ft).
7 .
Attach both stabilizer bar links.
Tighten the nuts to 115 Nm (85 lb.ft).
8 .
Install the wheels and tires.
9 .
Lower the vehicle.
10 .
Install the spare wheel and tire.
11 .
Install the rear bumper cover. For additional information, refer to
Rear Bumper Cover (76.22.74)
(Section 501-19)