LR3/Disco 3
Align the bolt to the marks made previously.
Tighten the bolt to 175 Nm (129 lb.ft).
4 .
Tighten the upper arm front bolt to 175 Nm (129 lb.ft).
5 .
Tighten the upper arm rear bolt to 275 Nm (203 lb.ft).
6 .
Secure the wheel speed sensor lead.
7 .
Secure the brake pad wear indicator sensor lead.
8 .
Connect the height sensor link arm.
9 .
Install the brake tube.
Tighten the brake tube unions to 18 Nm (13 lb.ft).
10 .
Bleed the brake system. For additional information, refer to
Brake System Bleeding (70.25.02)
(Section 206-00)
11 .
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
12 .
Carry out the wheel alignment procedure.
