LR3/Disco 3
Installation
5 .
Remove the air spring.
Using a soft faced mallet, gently tap the sleeve support upwards to release it from the O-
ring seals.
Remove and discard the 2 O-ring seals.
6 .
Remove the rebound plate and spring aid.
7 .
Remove the shock absorber from the vise.
1 .
Install the shock absorber in the vise.
2 .
Clean the components.
3 .
Lubricate and install new O-rings to the seal carrier.
4 .
Install the spring aid and rebound plate.