LR3/Disco 3
Air Suspension Reservoir (60.50.03)
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Using T4, depressurize the air suspension. For additional information, refer to
Air Suspension
System Depressurize and Pressurize (60.50.38)
(Section 204-05 Vehicle Dynamic Suspension)
3 .
CAUTION: Before the disconnection or removal of any components, ensure the area around
joint faces and connections are clean. Plug any open connections to prevent contamination.
CAUTION: The air line must only be disconnected by removal of the voss connector. Do not
remove the air line retaining boss from the air suspension reservoir. Failure to follow this instruction
may result in damage to the vehicle.
CAUTION: Visually inspect the air line ends for damage or wear. Repair or replace the air line
as necessary.
Disconnect the air line from the air suspension reservoir.
4 .
Remove the air suspension reservoir.
Remove the 4 bolts.