LR3/Disco 3
18.
Clean the caliper housing and anchor plate using brake cleaning fluid.
19. Install the anchor plate.
20. Install the brake caliper housing and fit the top bolt.
21. Install the brake pads.
22. Rotate the brake caliper downwards.
23. Connect the brake pad wear indicator sensor.
24. Secure the brake hose retaining bracket to the wheel knuckle.
25. Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top-up with brake fluid if
necessary.
WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be
harmful if inhaled.
l
Tighten the bolts to 115 Nm (85 lb.ft).
l
Tighten the bolt to 32 Nm (24 lb.ft).
l
Install the two clips.
l
Tighten the bolt to 32 Nm (24 lb.ft).
l
Tighten the bolt to 25 Nm (18 lb.ft).