LR3/Disco 3
Vehicles with dynamic suspension
All vehicles
1 .
Install the dynamic response line supports.
Tighten the supports to 10 Nm (7 lb.ft).
Tighten the nuts to 10 Nm (7 lb.ft).
1 .
Install the radiator access panel.
Tighten the bolts to 10 Nm (7 lb.ft).
2 .
Install the splash shields.
Install the clips.
3 .
Connect the tie-rod end ball joints.
Clean the component mating faces.
Install new nuts and tighten to 70 Nm (52 lb.ft).
4 .
Install the front wheels and tires.
5 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
6 .
Fill and bleed the power steering system. For additional information, refer to
Power Steering System
Filling and Bleeding
(Section 211-00)
7 .
Adjust the front wheel alignment.