LR3/Disco 3
Install the camshaft drive cassette assembly.
Install a new O-ring seal.
Tighten the bolt to 12 Nm (9 lb.ft).
3 .
Using the special tool, tighten the new jackshaft sprocket bolt to 40 Nm (30 lb.ft), then a further 45
degrees.
4 .
Install the cylinder block jackshaft plug.
Clean the component mating faces.
5 .
Install the torque converter flexplate. For additional information, refer to
Flexplate (12.53.13)
(Section
303-01)
6 .
Install the cylinder head RH assembly. For additional information, refer to
Cylinder Head RH
(12.29.05)
(Section 303-01)
7 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)