LR3/Disco 3
10 .
Remove the RH cylinder head assembly.
Disconnect the cylinder head earth connector.
Remove the bolt.
11 .
Remove and discard the cylinder head gasket.
Clean the cylinder head locating dowels.
Clean and inspect the cylinder head and cylinder block.
12 .
NOTE :
Remove the camshaft bearing caps evenly and in stages.
NOTE :
Note the fitted position.
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the camshaft bearing caps.
Remove the 8 bolts.
Collect the camshaft oil supply line.