LR3/Disco 3
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
3 .
Release the exhaust system from the exhaust manifold.
Remove and discard the 2 bolts.
4 .
Lower the vehicle.
5 .
CAUTION: Protect the engine during this operation.
Raise the engine clear of its LH mount.
Remove the nut.
6 .
CAUTION: Before disconnecting or removing the components, ensure the area around the joint
faces and connections are clean. Plug open connections to prevent contamination.
Remove the EGR pipe.
Release the 2 union nuts.