Land Rover Workshop Service and Repair Manuals

7 . 

  Disconnect the high tension (HT) electrical connectors.

Move the leads aside for access. 

8 . 

   CAUTION: Before disconnecting or removing the components, ensure the area around the joint 

faces and connections are clean. Plug open connections to prevent contamination. 

Remove the dipstick tube. 

Remove the dipstick. 

Remove the bolt. 

Discard the O-ring seal. 

9 . 

  Remove the exhaust manifold. 

Remove the 6 nuts. 

Remove and discard the gasket.