In Vehicle Repair - LR3/Disco 3 Intake Manifold Repair - 40L Engine
14 .
Release the purge line from the intake manifold.
Remove the clip retaining bolt.
Collect the spacer.
15 .
Release the coil wiring harness.
Release the 6 clips.
Remove the 2 coil harness ground nuts.
16 .
Disconnect the 6 coil electrical connectors.
17 .
NOTE :
Note the fitted position of the fasteners.
Remove the 2 rear ignition coils.
Disconnect the sparking plug lead elbows at the coils.
Remove the 2 bolts and 2 studs.
Discard the fastener O-rings to aid installation.