LR3/Disco 3
23 .
CAUTION: Early vehicles only: The purge valve and mounting bracket are bolted to the rear of
the intake manifold and foul the fuel rail crossover link. Damage will occur if force is used when
attempting to remove the intake manifold. If this occurs, remove the LH side, battery tray inner wall
and base, for access to the purge valve bolt.
CAUTION: Care must be taken to avoid damaging the purge vale assembly during removal of
the intake manifold.
NOTE :
Due to the lack of access it may be necessary to break the engine and transmission wiring harness
clips, care must be taken not to damage the wiring harnesses.
Release and then remove the intake manifold.
Discard the gaskets.
Install blanking caps to the exposed ports.
24 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the throttle body.