LR3/Disco 3
Tighten the bolts to 20 Nm (15 lb.ft).
2 .
Install the transmission retaining bolts.
Tighten the bolts to 45 Nm (33 lb.ft).
3 .
Install the HO2S mounting bracket.
Tighten the 2 bolts to 10 Nm (7 lb.ft).
4 .
Connect the HO2S electrical connectors.
Install the wiring harness clips.
5 .
Install the HO2S wring harness.
Secure the clips.
6 .
Install the generator mounting bracket.
Clean the component mating faces.
7 .
Install the generator. For additional information, refer to
Generator (86.10.02)
(Section 414-02)
8 .
Install the steering gear. For additional information, refer to
Steering Gear - 4.4L (57.10.01)
(Section
211-02)
9 .
Install the front differential. For additional information, refer to
Axle Assembly (54.10.01)
(Section
205-03)
10 .
Install the oil cooler assembly. For additional information, refer to
Oil Cooler (12.60.68)
(Section
303-01)
11 .
Install the engine front cover. For additional information, refer to
Engine Front Cover (12.65.01)
(Section 303-01)
12 .
Fill the engine with oil.
13 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)