LR3/Disco 3
Install the four retaining bolts and tighten to 10 Nm (7 lb.ft).
Connect the hoses and secure with the clips.
4 .
Secure the coolant bleed hose to the EGR coolant inlet hose.
5 .
Install the crankcase vent oil separator. For additional information, refer to
Crankcase Vent Oil
Separator (17.10.04)
(Section 303-08)
6 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
7 .
Refill and bleed the cooling system. For additional information, refer to
Cooling System Draining,
Filling and Bleeding (26.10.01)
(Section 303-03)
8 .
Check and top-up the engine oil.