LR3/Disco 3
Installation
16 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the power steering fluid cooler line clip.
1 .
Install the power steering fluid cooler line clip.
2 .
Install the radiator.
Remove the element protection.
Tighten the bolts to 25 Nm (18 lb.ft).
3 .
Install the radiator upper deflector.
4 .
Install the A/C condenser.
Secure in the clips.
Tighten the screws.
Tighten the bolt to 6 Nm (4 lb.ft).
5 .
Install the power steering fluid cooler.
Secure in the 3 clips.
6 .
Install the radiator securing pegs.
7 .
Install the transmission cooler hoses.
Install the clips.
8 .
Connect the radiator upper hose.
Secure with the clip.
9 .
Connect the expansion tank hose.