LR3/Disco 3
Tighten the bolts to 10 Nm (7 lb.ft).
2 .
Install the coolant pump pulley.
Clean the components.
Tighten the bolts to 25 Nm (18 lb.ft).
3 .
Install the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05)
4 .
Refill and bleed the cooling system. For additional information, refer to
Cooling System Draining,
Filling and Bleeding (26.10.01)
(Section 303-03)
