LR3/Disco 3
Vehicles with automatic transmission
Secure with the clip.
2 .
Install the radiator upper hose.
Secure with the clip.
3 .
Connect the charge air outlet hose.
Tighten the clip to 10 Nm (7 lb.ft).
4 .
Connect the charge air inlet hose.
Tighten the clip to 10 Nm (7 lb.ft).
5 .
Install the front RH splash shield.
Install the 4 clips.
6 .
Secure the coolant expansion tank.
Tighten the 2 bolts to 10 Nm (7 lb.ft).
7 .
Connect the radiator bleed hose.
Secure with the clip.
8 .
Install the cooling fan lower shroud. For additional information, refer to
Cooling Fan Shroud
(26.25.11)
(Section 303-03)
9 .
Install the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section 501-
08)
10 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
11 .
Refill the cooling system.
1 .
Check automatic transmission fluid level.