LR3/Disco 3
Throttle Body Gasket
Removal
Installation
Published : Mar 2, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00 )
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section 501-05)
3 .
Remove the air intake resonator. For additional information, refer to
Intake Air Resonator (19.70.03)
(Section 303-12A )
4 .
Remove the throttle body.
Remove the 4 bolts.
Remove and discard the throttle body gasket.
1 .
Install the throttle body.
Clean the components.
Install a new gasket.
Tighten the 4 bolts to 10 Nm (7 lb.ft).
2 .
Install the air intake resonator. For additional information, refer to
Intake Air Resonator (19.70.03)
(Section 303-12A )
3 .
Install the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section
501-05)
4 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00 )