LR3/Disco 3
Tighten the EGR valve retaining bolt to 10 Nm (7 lb.ft).
9 .
Connect the coolant outlet hose to the EGR valve.
10 .
Connect the coolant inlet hose to the EGR valve.
11 .
Connect the EGR valve electrical connector.
12 .
Install the fuel line retaining bracket.
Install the fuel line retaining bracket retaining bolt and tighten to 10 Nm (7 lb.ft).
Secure the fuel lines.
13 .
Install the RH EGR valve outlet tube. For additional information, refer to
Exhaust Gas Recirculation
(EGR) Valve Outlet Tube (17.45.18)
(Section 303-08)
14 .
Install the auxiliary battery tray. For additional information, refer to
Auxiliary Battery Tray (76.10.31)
(Section 414-01)
15 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
16 .
Refill and bleed the cooling system. For additional information, refer to
Cooling System Draining,
Filling and Bleeding (26.10.01)
(Section 303-03)