LR3/Disco 3
Crankshaft Position (CKP) Sensor (18.30.12)
Removal
Installation
Published : Jul 28, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the turbocharger. For additional information, refer to
Turbocharger (19.42.01)
(Section 303-
04)
3 .
Disconnect the CKP sensor electrical connector.
4 .
Remove the CKP sensor blanking cover.
5 .
NOTE :
The CKP sensor retaining bolt should not be removed from the CKP sensor.
Remove the CKP sensor.
Fully loosen the CKP sensor retaining bolt.