LR3/Disco 3
Engine Control Module (ECM) (18.30.03)
Removal
Published : Jul 19, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the four-wheel drive control module. For additional information, refer to
Four-Wheel Drive
(4WD) Control Module (41.30.01)
(Section 308-07)
3 .
NOTE :
Right hand drive shown, for Left hand drive reverse the sequence.
Disconnect the three engine harness electrical connectors in the order shown.
Position the three engine harness electrical connectors aside for access.
4 .
Remove the ECM securing plate.
Remove the four ECM securing bolts
5 .
Remove the ECM.
Remove the ECM top cover.