LR3/Disco 3
Installation
1 .
Install the ECM.
Install the ECM top cover.
2 .
Install the ECM securing plate.
Install and tighten the four securing bolts.
3 .
Connect the three engine harness electrical connectors.
4 .
Install the four-wheel drive control module. For additional information, refer to
Four-Wheel Drive
(4WD) Control Module (41.30.01)
(Section 308-07)
5 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
6 .
Connect T4 to calibrate a new ECM.
