LR3/Disco 3
Fluid Pan, Gasket and Filter (44.24.04)
Removal
Published : Jun 29, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.0L (12.30.50)
(Section 501-05)
3 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
4 .
Remove the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
5 .
Remove the transmission support insulator.
Remove the 4 bolts.
6 .
Remove the transmission heat shield.
Remove the 4 bolts.
7 .
Release the selector cable from its abutment bracket.