LR3/Disco 3
8 .
Remove the transmission heat shield bracket.
Remove the 4 bolts.
9 .
Drain the transmission. For additional information, refer to
Transmission Fluid Drain and Refill
(44.24.02)
(Section 307-01)
10 .
CAUTION: Protect the engine during this operation.
Raise the RH side of the engine by approximately 15 mm.
Remove the nut.
Use a transmission jack.
11 .
Remove the fluid pan.
Position a container to collect the fluid spillage.
Remove the 21 Torx screws.
Remove and if necessary, discard the seal.
Discard the O-ring seal.