Land Rover Workshop Service and Repair Manuals

Install new seals. 

Install a new seal block. 

Tighten the Torx screws to 8 Nm (6 lb.ft). 

2 . 

  Install a new electrical connector sleeve.

Secure with retainer. 

3 . 

  Connect the electrical connector.

4 . 

Install the fluid pan. For additional information, refer to 

Fluid Pan, Gasket and Filter (44.24.04)

(Section 307-01) 

5 . 

  Calibrate a new main control valve body using T4.