LR3/Disco 3
NOTE :
Transmission shown removed for clarity.
With assistance, remove the transmission.
Remove the 15 transmission retaining bolts.
24 .
Using a suitable tool retain the torque converter.
25 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the transmission from the transmission jack.
26 .
Drain the transmission fluid.
27 .
With assistance, remove the transfer case.
Remove the 8 bolts.
Remove and discard the O-ring seal.
28 .
Remove the selector cable bracket.
Remove the two retaining bolts.