Land Rover Workshop Service and Repair Manuals

Installation  

29 . 

  Remove the selector lever. 

Remove the retaining nut. 

1 . 

  With assistance, install the transfer case. 

Clean the component mating faces. 

Lubricate input shaft splines with 'Weicon TL7391' grease.

Install a new O-ring seal. 

Install the eight retaining bolts. 

Using the special tool, tighten the bolts to 45 Nm (33 lb.ft).

2 . 

  Secure the selector lever. 

Tighten the nut to 12 Nm (9 lb.ft).

3 . 

  Attach the selector cable bracket. 

Install the two bolts and tighten to 10 Nm (7 lb.ft).