LR3/Disco 3
8 .
Clamp the relevant hose, to minimise coolant loss.
9 .
CAUTION: Before disconnecting or removing the components, ensure the area around the joint
faces and connections are clean. Plug open connections to prevent contamination.
NOTE :
The receiver drier need only be changed under the following circumstances: There is dirt in the
refrigerant circuit ( eg. compressor seizure ). The system is leaking and refrigerant has been lost to
atmosphere. Refrigerant circuit has been open more than 24 hours due to repair.
Disconnect the A/C pipes.
Remove the 2 bolts.
Discard the O-ring seals.
10 .
CAUTION: Engine coolant will damage the paint finished surfaces. If spilt, immediately
remove the coolant and clean the area with water.
NOTE :
Some fluid spillage is inevitable during this operation.
Disconnect the 2 coolant hoses.
Position a container to collect the fluid.
Release the 2 clips.
11 .
Release the sealing plate.
Remove the 3 bolts.
12 .
Remove the climate control assembly.
