LR3/Disco 3
Installation
4 .
WARNING: Eye protection must be worn.
With assistance, remove the roof panel fixed glass.
Carefully cut through the sealant using a glazing knife or cutting wire.
Attach the suction cups.
Noting fitted position, remove the 11 spacers.
1 .
Carefully remove the sealant from the body to leave a smooth surface.
2 .
Install the roof panel fixed glass.
Install the spacers equally as shown.
Use masking tape to establish reference marks as an alignment aid.
3 .
With assistance, remove the roof panel fixed glass.
Clean the component mating faces.
4 .
Apply etch primer to any bare metal.
5 .
Apply primer over the etch primer.
6 .
Apply glass primer to the sealant face on the roof panel fixed glass and allow to cure.
7 .
Apply activator over the old sealant on the roof panel and allow to cure.
