LR3/Disco 3
8 .
Fit a pre-cut nozzle to the sealer cartridge, remove the lid, shake out the crystals and fit the cartridge
to the applicator gun.
Modify the nozzle to achieve a bead section in the shape of a right angle triangle with a
base of 8 mm and a vertical height of 12 mm.
9 .
Apply a continuous bead of sealant to the roof panel fixed glass as shown.
10 .
With assistance, install and align the roof panel fixed glass.
Lightly press the roof panel fixed glass to seat the sealer.
11 .
Test the sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry
before testing. Spray water around the glass and check for leaks. Mark any area that leaks. Dry the
glass and sealer then apply additional sealer.
12 .
Install the antenna.
Tighten the screws.
Connect the cable.
13 .
Install the roof mouldings.
Secure with the clips.
14 .
Install the headliner. For additional information, refer to
Headliner (76.64.15)
(Section 501-05)
