LR3/Disco 3
10 .
With assistance, install and align the liftgate window glass.
Lightly press the window glass to seat the sealer.
11 .
Test the sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry
before testing. Spray water around the glass and check for leaks. Mark any area that leaks. Dry the
glass and sealer then apply additional sealer.
12 .
Connect the heated rear window electrical connectors.
13 .
Install the liftgate side trim panel.
Secure with the clips.
Repeat the above procedure for the other side.
14 .
Install the liftgate upper trim panel.
Secure with the clips.
15 .
Install the liftgate lower trim panel. For additional information, refer to
Liftgate Trim Panel (76.34.11)
(Section 501-05)
16 .
Install the rear wiper drive spindle seal.
17 .
Install the rear wiper arm. For additional information, refer to
Rear Wiper Pivot Arm (84.35.01)
(Section 501-16)
