LR3/Disco 3
Rear Door Fixed Window Glass (76.31.31)
Removal
Published : Jun 14, 2004
1 .
Remove the rear door window motor and regulator assembly. For additional information, refer
to
Rear Door Window Regulator and Motor (86.25.05)
(Section 501-11)
2 .
Lower the rear door glass to the bottom of the door.
Remove the wedge.
3 .
Remove the rear door frame trim.
Release the 2 clips.
Carefully release the door trim.
4 .
Carefully remove the inner waist seal.
5 .
Release the lining from the glass rear channel.
6 .
Remove the rear door window fixed glass.
Remove the grommet.
Loosen the Torx screw, but do not remove it completely at this stage.
Pull the lower edge of the glass forward to release it from the door frame.