LR3/Disco 3
Installation
CAUTION: Care must be taken not to damage the air bag curtain module when cutting through
the sealant.
With assistance, remove the rear quarter window glass.
Carefully cut through the sealant using a glazing knife or cutting wire.
Attach the suction cups.
Noting fitted position, remove the 4 spacers.
1 .
Carefully remove the sealant from the body to leave a smooth surface.
2 .
Apply etch primer to any bare metal.
3 .
Apply primer over the etch primer.
4 .
Apply glass primer to the sealant face on the rear quarter window glass and allow to cure.
5 .
Apply activator over the old sealant on the rear quarter window glass and allow to cure.
6 .
Fit a pre-cut nozzle to the sealer cartridge, remove the lid, shake out the crystals and fit the cartridge
to the applicator gun.
Modify the nozzle to achieve a bead section in the shape of a right angle triangle with a
base of 8 mm and a vertical height of 12 mm.
7 .
Apply a continuous bead of sealant to the rear quarter window glass as shown.
8 .
With assistance, install and align the rear quarter window glass.
